Get Configuration (Version 1.0)

This article explains the legacy version of Rate Limiting that underwent end-of-life on June 30, 2021. Our new version of WAF expands upon all of the capabilities offered by WAF (Legacy) and Rate Limiting (Legacy) with a simplified and centralized setup. Please upgrade to the latest version of WAF at your earliest convenience.

WAF Essential cannot be configured via our APIs. However, you may leverage our APIs to retrieve WAF and Rate Limiting event log data.

Retrieves the current rate limiting configuration.

This endpoint only supports JSON.

Request

A request to retrieve the current rate limiting configuration is described below.

HTTP Method	Request URI
GET	https://api.edgecast.com/v2/mcc/customers/AccountNumber/waf/v1.0/limits

Define the following term when submitting the above request:

VariableA variable represents a value that must be replaced. A variable consists of either a URL segment (e.g., "0001" in /0001/) or a query string value (e.g., "3" in mediaTypes=3).	Description
AccountNumber Required	Replace this variable with a customer account number. This account number may be found in the upper right-hand corner of the MCC.

VariableA variable represents a value that must be replaced. A variable consists of either a URL segment (e.g., "0001" in /0001/) or a query string value (e.g., "3" in mediaTypes=3).

Description

AccountNumber

Required

Replace this variable with a customer account number. This account number may be found in the upper right-hand corner of the MCC.

Request Headers

This endpointIdentifies a request's connection point to our REST API service. only takes advantage of common request headers.

Request Body

Request body parameters are not required by this endpoint.

Response

The response to the above request includes an HTTP status code, response headers, and a response body.

Status Code

A status code indicates whether the request was successfully performed.

Response Headers

The response for this endpoint only includes standard HTTP response headers.

View common response headers.

Response Body

The response body for a successful request contains the following response parameters:

Name	Data Type	Description
customer_id	String	Identifies a customer by account number.
enabled_date	String	Identifies the date on which the Rate Limiting configuration was enabled. Format: YYYY-MM-DDThh:mm:ss:ffffffZ Example: 2024-06-30T20:42:09.330793Z The above value represents June 30th, 2024 at 8:42 p.m. UTC. For more information on date/time format, please refer to Report Date/Time Format.
id	String	Identifies the current version of the Rate Limiting configuration by a system-defined alphanumeric ID. Example: 12345678-90ab-cdef-ghij-klmnopqrstuvwxyz1
last_modified_date	String	Identifies the date on which the Rate Limiting configuration was last modified. Format: YYYY-MM-DDThh:mm:ss:ffffffZ Example: 2024-06-30T20:42:09.330793Z The above value represents June 30th, 2024 at 8:42 p.m. UTC. For more information on date/time format, please refer to Report Date/Time Format.
name	String	Indicates the name assigned to the Rate Limiting configuration.
limits	Array Objects	Contains a list of rules.
id	String	limits array Indicates the system-defined alphanumeric ID for the current rule. Example: 12345678-90ab-cdef-ghij-klmnopqrstuvwxyz1
name	String	limits array Indicates the name of the rule.
disabled	Boolean	limits array Indicates whether a rule will be enforced. Valid values are: true: Disabled. This rule will not be used to rate limit site traffic. false: Enabled. Traffic is being restricted according to the policy defined in the rule.
keys	Array String values	limits array Indicates the method by which the current rule groups requests. Rate limiting is applied to grouped requests. Valid values are: Missing / Empty Array: If the keys property is not defined or set to an empty array, all requests will be treated as a single group for the purpose of rate limiting. IP: Indicates that requests will be grouped by IP address. Each unique IP address is considered a separate group. User_Agent: Indicates that requests will be grouped by a client's user agent. Each unique combination of IP address and user agent is considered a separate group.
duration_sec	Integer	limits array Indicates the length, in seconds, of the rolling window that tracks the number of requests eligible for rate limiting. The rate limit formula is calculated through the num and duration_sec properties as indicated below. num requests per duration_sec Valid values are: 1 \| 5 \| 10 \| 30 \| 60 \| 120 \| 300
num	Integer	limits array Indicates the rate limit value. This value identifies the number of requests that will trigger rate limiting. The rate limit formula is calculated through the num and duration_sec properties as indicated below. num requests per duration_sec
action	Object	limits array Contains settings that define the action that will be applied to a request that has exceeded the rate limit.
id	String	limits array > action object Indicates the system-defined alphanumeric ID assigned to the rate limiting action. Example: 12345678-90ab-cdef-ghij-klmnopqrstuvwxyz1
name	String	limits array > action object Indicates the name assigned to the rate limiting action.
type	String	limits array > action object Indicates the type of action that will be applied to rate limited requests. Valid values are: custom-response: A custom HTTP response will be sent to rate limited responses. drop-request: Rate limited requests will be dropped. redirect-302: Rate limited requests will be redirected via a 302 Found. nop: Rate limited requests will only generate an alert.
enf_type	String	limits array > action object Indicates the type of action that will be applied to rate limited requests. Valid values are: CUSTOM_RESPONSE: A custom HTTP response will be sent to rate limited responses. DROP_REQUEST: Rate limited requests will be dropped. REDIRECT_302: Rate limited requests will be redirected via a 302 Found. NOP: Rate limited requests will only generate an alert.
duration_sec	Integer	limits array > action object Indicates the length of time, in seconds, that the action defined within the action object will be applied to a client that violates the rate limit defined by this rule. Valid values are: 10 \| 60 \| 300
response_body_base64	String	limits array > action object Custom Response Only Indicates the response body that will be sent to rate limited requests. This value is Base64 encoded.
response_headers	Array Objects	limits array > action object Custom Response Only Contains the set of headers that will be included in the response sent to rate limited requests.
key	String	limits array > action object > response_headers object Custom Response Only Identifies the name of the response header that will be included in the custom response sent to rate limited requests.
value	String	limits array > action object > response_headers object Custom Response Only Indicates the value for the response header that will be included in the custom response sent to rate limited requests.
status	Integer	limits array > action object Custom Response Only Indicates the HTTP status code (e.g., 404) for the custom response sent to rate limited requests.
url	String	limits array > action object Redirect Only Indicates the URL to which rate limited requests will be redirected.
condition_groups	Array Objects	limits array Contains the set of condition groups associated with a rule.
id	String	limits array > condition_groups array Indicates the system-defined alphanumeric ID of a condition group. Example: 12345678-90ab-cdef-ghij-klmnopqrstuvwxyz1
name	String	limits array > condition_groups array Indicates the name of a condition group.
conditions	Array Objects	limits array > condition_groups array Contains a list of match conditions.
op	Object	limits array > condition_groups array > conditions array Contains the properties of a match condition. The target property determines the type of match condition.
is_case_insensitive	Boolean	limits array > condition_groups array > conditions array > op object Indicates whether the comparison between the requestThe attribute (e.g., hostname, URL path, IP address, etc.) of the request that will be compared is determined by the variable array. and the values property is case-sensitive. Valid values are: True: Case-insensitive False: Case-sensitive
is_negated	Boolean	limits array > condition_groups array > conditions array > op object Indicates whether this match condition will be satisfied when the requestThe attribute (e.g., hostname, URL path, IP address, etc.) of the request that will be compared is determined by the variable array. matches or does not match the value defined by the values property. Valid values are: True: Does not match False: Matches
type	String	limits array > condition_groups array > conditions array > op object Indicates how the system will interpret the comparison between the requestThe attribute (e.g., hostname, URL path, IP address, etc.) of the request that will be compared is determined by the variable array. and the value/values property. Learn more about match types. Valid values: EM: Requires that the request's attribute be set to one of the value(s) defined in the values property. IPMATCH: Requires that the request's IP address either be contained by an IP block or be an exact match to an IP address defined in the values property. Only use IPMATCH with the REMOTE_ADDR match condition. RX: Requires that the request's attribute satisfy the regular expression defined in the value property.
value	String	limits array > condition_groups array > conditions array > op object Identifies a regular expression used to identify requests that are eligible for rate limiting.
values	Array String values	limits array > condition_groups array > conditions array > op object Identifies one or more values used to identify requests that are eligible for rate limiting.
target	Object	limits array > condition_groups array > conditions array Describes the type of match condition.
type	String	limits array > condition_groups array > conditions array > target object Determines how requests will be identified. Valid values are: FILE_EXT \| REMOTE_ADDR \| REQUEST_HEADERS \| REQUEST_METHOD \| REQUEST_URI
value	String	limits array > condition_groups array > conditions array > target object. REQUEST_HEADERS only Indicates the name of the request header through which requests will be identified. Valid values are: Host \| Referer \| User-Agent
scope	Object	limits array Contains the scope for the current rule.
host	Object	limits array > scope object Contains hostname criteria that defines the set of requests eligible for rate limiting by the current rule.
is_case_insensitive	Boolean	limits array > scope object > host object Indicates whether the comparison between the host defined in the request URL and the value defined by the value \| values property is case-sensitive. Valid values are: True: Case-insensitive False: Case-sensitive
is_negated	Boolean	limits array > scope object > host object Indicates whether this scope condition will be satisfied when the host defined in the request URL matches or does not match the value defined by the value \| values property. Valid values are: True: Does not match False: Matches
type	String	limits array > scope object > host object Indicates how the system will interpret the comparison between the request's hostname and the value defined within the value \| values property. Learn more about match types. Valid values: EM: Indicates that request's hostname must be an exact match to one of the case-sensitive values specified in the values property. GLOB: Indicates that the request's hostname must be an exact match to the wildcard pattern defined in the value property. RX: Indicates that the request's hostname must be an exact match to the regular expression defined in the value property. Apply this rate limit across all hostnames by setting this property to "GLOB" and setting the value property to "*." This type of configuration is also known as "Default."
value	String	limits array > scope object > host object Identifies a value that will be used to identify requests that are eligible for rate limiting. This property is only included in the response when the type property is set to one of the following values: GLOB or RX.
values	Array String values	limits array > scope object > host object Identifies one or more values used to identify requests that are eligible for rate limiting. This property is only included in the response when the type property is set to "EM."
path	Object	limits array > scope object Contains URL path criteria that defines the set of requests eligible for rate limiting by the current rule.
is_case_insensitive	Boolean	limits array > scope object > path object Indicates whether the comparison between the request's URL path and the value defined by the value \| values property is case-sensitive. Valid values are: True: Case-insensitive False: Case-sensitive
is_negated	Boolean	limits array > scope object > path object Indicates whether this scope condition will be satisfied when the request's URL path matches or does not match the value defined by the value \| values property. Valid values are: True: Does not match False: Matches
type	String	limits array > scope object > path object Indicates how the system will interpret the comparison between the request's URL path and the value defined within the value \| values property. Learn more about match types. Valid values: EM: Indicates that request's URL path must be an exact match to one of the case-sensitive values specified in the values property. GLOB: Indicates that the request's URL path must be an exact match to the wildcard pattern defined in the value property. RX: Indicates that the request's URL path must be an exact match to the regular expression defined in the value property. Apply this rate limit across all request URLs by setting this property to "GLOB" and setting the value property to "*." This type of configuration is also known as "Default."
value	String	limits array > scope object > path object Identifies a value that will be used to identify requests that are eligible for rate limiting. This property is only included in the response when the type property is set to one of the following values: GLOB or RX.
values	Array String values	limits array > scope object > path object Identifies one or more values used to identify requests that are eligible for rate limiting. This property is only included in the response when the type property is set to "EM."
type	String	This property always returns CONFIG.
version	String	This property always returns 2.

Errors

The response body for an unsuccessful request will contain an error response that provides additional information.

View common error messages.

Sample Request and Response

A sample JSON request is shown below.

GET https://api.edgecast.com/v2/mcc/customers/0001/waf/v1.0/limits HTTP/1.1

Authorization: TOK:12345678-1234-1234-1234-1234567890ab

Accept: application/json

Content-Type: application/json

Host:api.edgecast.com

A sample JSON response is shown below.

HTTP/1.1 200 OK

Cache-Control: private

Content-Type: application/json; charset=utf-8

Date: Thu, 15 Apr 2021 12:00:00 GMT

Content-Length: 1220

{
    "customer_id": "0001",
    "enabled_date": "2019-11-01T21:17:06.316715Z",
    "id": "l56kgWVG",
    "last_modified_date": "2019-11-01T21:17:06.316850Z",
    "limits": [{
            "action": {
                "duration_sec": 10,
                "id": "JMctNQKw",
                "name": "action",
                "type": "drop-request"
            },
            "condition_groups": [{
                    "conditions": [{
                            "op": {
                                "type": "EM",
                                "values": [
                                    ".aspx"
                                ]
                            },
                            "target": {
                                "type": "FILE_EXT"
                            }
                        }
                    ],
                    "id": "OhbZ_vaE",
                    "name": "name"
                }
            ],
            "disabled": false,
            "duration_sec": 5,
            "id": "5_tAMcgd",
            "name": "Drop Requests",
            "num": 30000
        }
    ],
    "name": "Rate Limiting",
    "type": "CONFIG",
    "version": 2
}